Part No | Category | Description | QTY | RFQ |
---|---|---|---|---|
STP-485DB9-CBL-2 | cables | surestep communication cable, 9-pin female d-sub to 5-pin connector, 6.5ft/2m cable length. for use with surestep stp-mtrd-xxxxxr integrated stepper motor/drives. | 1964 | RFQ |
STP-DRV-4850 | motion control | surestep dc advanced microstepping stepper drive, 5a per phase, 2-phase output, 24-48 vdc, bipolar, velocity and position mode, 200 to 51200 steps per revolution, (1) rs-232 (rj11) port(s). | 1412 | RFQ |
STP-MTRA-ENC1 | rotary encoders | surestep incremental (quadrature) modular encoder, replacement, 5 vdc, radial, line driver (differential) output, 1000 ppr. for use with surestep stepper motors with 5mm rear shaft. | 1395 | RFQ |
STP-CON-1 | motion control | surestep connector kit, replacement, includes (1) drive/motor power connector and (1) control signal connector. for use with surestep stp-drv-4845 and stp-drv-6575 microstepping drives. | 2306 | RFQ |
STP-MTRD-23065 | motion control | surestep dc integrated stepper motor/drive, microstepping, nema 23 frame, ip20, 5a, 12-48 vdc, bipolar, 210 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution. | 1148 | RFQ |
STP-EXTL-020 | cables | surestep extension cable, 4-pin connector to pigtail, 20ft cable length. for use with surestep mtrl series stepper motors. | 2263 | RFQ |
STP-DRVA-BR-100 | motion control | surestep braking resistor, 100w, 10 ohm, encapsulated. for use with multiple stepper drives. requires stp-drv-rc-050 regen clamp. | 2825 | RFQ |
STP-DRV-80100 | motion control | surestep dc advanced microstepping stepper drive, 10a per phase, 2-phase output, 24-80 vdc, bipolar, velocity and position mode, 200 to 51200 steps per revolution, (1) rs-232 (rj11) port(s). | 2213 | RFQ |
STP-EXTW-006 | motion control | surestep extension cable, 6-pin connector to pigtail, 6ft cable length. for use with surestep mtr series ip65 stepper motors. | 1299 | RFQ |
STP-CBL-EA6 | cables | surestep encoder cable, 10-pin connector to pigtail, 6ft cable length. for use with surestep integrated stepper motor/drives with external encoder. | 2467 | RFQ |
STP-MTRH-34127W | motion control | surestep stepper motor, nema 34 frame, ip65, single shaft, 6.3a, 1288 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2994 | RFQ |
STP-EXTHW-010 | cables | surestep extension cable, 6-pin connector to pigtail, 10ft cable length. for use with surestep mtrh series ip65 stepper motors. | 2849 | RFQ |
STP-MTRAC-23044 | motion control | surestep stepper motor, nema 23 frame, ip40, single shaft, 0.71a, 75 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1959 | RFQ |
STP-MTR-23079W | motion control | surestep stepper motor, nema 23 frame, ip65, single shaft, 2.8a, 276 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1872 | RFQ |
STP-MTR-23079E | motion control | surestep stepper motor, nema 23 frame, ip40, dual shaft, external (field-wireable) encoder, 2.8a, 276 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. requires stp-cbl-ebxx cable. | 1447 | RFQ |
STP-MTR-23055W | motion control | surestep stepper motor, nema 23 frame, ip65, single shaft, 2.8a, 166 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2706 | RFQ |
STP-CBL-CA20 | cables | surestep control cable, 11-pin connector to pigtail, 20ft cable length. for use with surestep stp-mtrd-17038 and stp-mtrd-17038e integrated stepper motor/drives. | 1463 | RFQ |
STP-EXTW-010 | cables | surestep extension cable, 6-pin connector to pigtail, 10ft cable length. for use with surestep mtr series ip65 stepper motors. | 2087 | RFQ |
STP-MTRD-24075RV | motion control | surestep dc integrated stepper motor/drive, advanced microstepping, nema 24 frame, ip20, 6a, 12-70 vdc, bipolar, 340 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution, (1) rs-485 (4-pin) port(s). | 2248 | RFQ |
STP-MTRD-23065RE | motion control | surestep dc integrated stepper motor/drive, advanced microstepping, nema 23 frame, ip20, 5a, 12-70 vdc, bipolar, 210 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution, internal (inaccessible) encoder, (1) rs-485 (4-pin) port(s). | 2860 | RFQ |
STP-MTRD-17030R | motion control | surestep dc integrated stepper motor/drive, advanced microstepping, nema 17 frame, ip20, 2a, 12-48 vdc, bipolar, 54 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution, (1) rs-485 (4-pin) port(s). | 1921 | RFQ |
STP-CON-6 | motion control | surestep connector kit, replacement, includes (1) input power connector, (1) motor power connector and (1) control signal connector. for use with surestep stp-drv-4845 and stp-drvac-24025 microstepping drives. | 2206 | RFQ |
STP-MTRH-23079E | motion control | surestep stepper motor, nema 23 frame, ip40, dual shaft, external (field-wireable) encoder, 5.6a, 286 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. requires stp-cbl-ebxx cable. | 2403 | RFQ |
STP-MTRAC-34156 | motion control | surestep stepper motor, nema 34 frame, ip40, single shaft, 2.5a, 1841 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2329 | RFQ |
STP-MTRAC-23055 | motion control | surestep stepper motor, nema 23 frame, ip40, single shaft, 0.71a, 149 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1278 | RFQ |
STP-CBL-EA10 | rotary encoders | surestep encoder cable, 10-pin connector to pigtail, 10ft cable length. for use with surestep integrated stepper motor/drives with external encoder. | 1263 | RFQ |
STP-MTRD-17038E | motion control | surestep dc integrated stepper motor/drive, microstepping, nema 17 frame, ip20, 2a, 12-48 vdc, bipolar, 68 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution, external (field-wireable) encoder. | 1260 | RFQ |
STP-MTR-23079D | motion control | surestep stepper motor, nema 23 frame, ip40, dual shaft, encoder ready, 2.8a, 276 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2713 | RFQ |
STP-MTRAC-34115 | motion control | surestep stepper motor, nema 34 frame, ip40, single shaft, 2.05a, 1110 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2168 | RFQ |
STP-DRV-4845 | motion control | surestep dc microstepping stepper drive, 4.5a per phase, 2-phase output, 24-48 vdc, bipolar, velocity and position mode, 200 to 20000 steps per revolution. | 2106 | RFQ |
STP-MTR-23079 | motion control | surestep stepper motor, nema 23 frame, ip40, single shaft, 2.8a, 276 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2453 | RFQ |
STP-PWR-4805 | power products (electrical) | surestep linear power supply, 48 vdc at 5a unregulated, 5 vdc at 0.5a regulated output, 5a, 240w, 120/240 vac nominal input, switch selectable, 1-phase, anodized aluminum open frame, wall mount, screw terminals. | 2575 | RFQ |
STP-MTRA-17DMP | motion control | surestep damper, metal body. for use with nema 17 stepper motors with 5mm shafts. mounting set screw included. | 2008 | RFQ |
STP-CBL-EA6 | rotary encoders | surestep encoder cable, 10-pin connector to pigtail, 6ft cable length. for use with surestep integrated stepper motor/drives with external encoder. | 2165 | RFQ |
STP-MTRD-24075RVE | motion control | surestep dc integrated stepper motor/drive, advanced microstepping, nema 24 frame, ip20, 6a, 12-70 vdc, bipolar, 340 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution, internal (inaccessible) encoder, (1) rs-485 (4-pin) port(s). | 1700 | RFQ |
STP-EXTL-010 | cables | surestep extension cable, 4-pin connector to pigtail, 10ft cable length. for use with surestep mtrl series stepper motors. | 2479 | RFQ |
STP-MTRL-14034D | motion control | surestep stepper motor, nema 14 frame, ip40, dual shaft, encoder ready, 0.8a, 20 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2095 | RFQ |
STP-MTRH-23079D | motion control | surestep stepper motor, nema 23 frame, ip40, dual shaft, encoder ready, 5.6a, 286 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1624 | RFQ |
STP-232RJ11-CBL | cables | surestep programming/communication spare cable, 9-pin d-sub female to 6p4c rj11, 10ft cable length. for use with surestep stp-drv-80100 and stp-drv-4850 drives. | 2319 | RFQ |
STP-CBL-ED10 | cables | surestep encoder cable, 5-pin connector to pigtail, 10ft cable length. for use with surestep stepper encoders with 5-pin male connectors. | 1794 | RFQ |
STP-MTRH-34066D | motion control | surestep stepper motor, nema 34 frame, ip40, dual shaft, encoder ready, 6.3a, 434 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2672 | RFQ |
STP-MTR-34066 | motion control | surestep stepper motor, nema 34 frame, ip40, single shaft, 2.8a, 434 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1934 | RFQ |
STP-EXTW-020 | cables | surestep extension cable, 6-pin connector to pigtail, 20ft cable length. for use with surestep mtr series ip65 stepper motors. | 1280 | RFQ |
STP-EXTHW-006 | cables | surestep extension cable, 6-pin connector to pigtail, 6ft cable length. for use with surestep mtrh series ip65 stepper motors. | 2845 | RFQ |
STP-MTR-34066W | motion control | surestep stepper motor, nema 34 frame, ip65, single shaft, 2.8a, 434 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1281 | RFQ |
STP-MTR-23055D | motion control | surestep stepper motor, nema 23 frame, ip40, dual shaft, encoder ready, 2.8a, 166 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1341 | RFQ |
STP-CBL-EA20 | rotary encoders | surestep encoder cable, 10-pin connector to pigtail, 20ft cable length. for use with surestep integrated stepper motor/drives with external encoder. | 2422 | RFQ |
STP-MTRA-ENC4 | rotary encoders | surestep incremental (quadrature) modular encoder, 5 vdc, radial, push-pull (totem) output, 400 ppr. for use with surestep stepper motors with 5mm rear shaft. | 1463 | RFQ |
STP-EXTL-006 | cables | surestep extension cable, 4-pin connector to pigtail, 6ft cable length. for use with surestep mtrl series stepper motors. | 2981 | RFQ |
STP-CBL-EA10 | cables | surestep encoder cable, 10-pin connector to pigtail, 10ft cable length. for use with surestep integrated stepper motor/drives with external encoder. | 2512 | RFQ |
STP-MTRAC-34115D | motion control | surestep stepper motor, nema 34 frame, ip40, dual shaft, encoder ready, 2.05a, 1110 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1058 | RFQ |
STP-MTRH-34097D | motion control | surestep stepper motor, nema 34 frame, ip40, dual shaft, encoder ready, 6.3a, 800 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1626 | RFQ |
STP-CBL-EB6 | cables | surestep encoder cable, 17-pin connector to pigtail, 6ft cable length. for use with surestep stepper encoder with 17-pin male connectors. | 1552 | RFQ |
STP-MTR-17040W | motion control | surestep stepper motor, nema 17 frame, ip65, single shaft, 1.7a, 61 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1212 | RFQ |
STP-PWR-4810 | power products (electrical) | surestep linear power supply, 48 vdc at 10a unregulated, 5 vdc at 0.5a regulated output, 10a, 480w, 120/240 vac nominal input, switch selectable, 1-phase, anodized aluminum open frame, wall mount, screw terminals. | 2736 | RFQ |
STP-MTRA-ENC3 | rotary encoders | surestep incremental (quadrature) modular encoder, 5 vdc, radial, line driver (differential) output, 400 ppr. for use with surestep stepper motors with 5mm rear shaft. | 2690 | RFQ |
STP-MTRH-34097 | motion control | surestep stepper motor, nema 34 frame, ip40, single shaft, 6.3a, 800 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2120 | RFQ |
STP-EXTW-006 | cables | surestep extension cable, 6-pin connector to pigtail, 6ft cable length. for use with surestep mtr series ip65 stepper motors. | 1206 | RFQ |
STP-USBENC-CBL-1 | rotary encoders | surestep programming cable, usb a connector to 17-pin connector, 3ft cable length. for use with surestep stepper encoder with 17-pin male connectors. | 2342 | RFQ |
STP-MTR-34066D | motion control | surestep stepper motor, nema 34 frame, ip40, dual shaft, encoder ready, 2.8a, 434 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1081 | RFQ |
STP-MTRD-17038 | motion control | surestep dc integrated stepper motor/drive, microstepping, nema 17 frame, ip20, 2a, 12-48 vdc, bipolar, 68 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution. | 1912 | RFQ |
STP-MTRAC-34075D | motion control | surestep stepper motor, nema 34 frame, ip40, dual shaft, encoder ready, 2.15a, 821 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2829 | RFQ |
STP-MTRL-14026 | motion control | surestep stepper motor, nema 14 frame, ip40, single shaft, 0.35a, 8 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2656 | RFQ |
STP-MTRD-17038R | motion control | surestep dc integrated stepper motor/drive, advanced microstepping, nema 17 frame, ip20, 2a, 12-48 vdc, bipolar, 68 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution, (1) rs-485 (4-pin) port(s). | 2313 | RFQ |
STP-MTRL-14034 | motion control | surestep stepper motor, nema 14 frame, ip40, single shaft, 0.8a, 20 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2488 | RFQ |
STP-CBL-CA6 | cables | surestep control cable, 11-pin connector to pigtail, 6ft cable length. for use with surestep stp-mtrd-17038 and stp-mtrd-17038e integrated stepper motor/drives. | 1373 | RFQ |
STP-CBL-ED20 | cables | surestep encoder cable, 5-pin connector to pigtail, 20ft cable length. for use with surestep stepper encoders with 5-pin male connectors. | 2892 | RFQ |
STP-MTRD-23042RE | motion control | surestep dc integrated stepper motor/drive, advanced microstepping, nema 23 frame, ip20, 5a, 12-70 vdc, bipolar, 125 oz-in holding torque, 1.8-degree step angle, 200 to 25000 steps per revolution, internal (inaccessible) encoder, (1) rs-485 (4-pin) port(s). | 2789 | RFQ |
STP-MTRAC-23078 | motion control | surestep stepper motor, nema 23 frame, ip40, single shaft, 0.71a, 227 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 1707 | RFQ |
STP-CON-2 | motion control | surestep connector kit, replacement, includes (1) drive/motor power connector, (1) analog signal connector and (1) input signal connector. for use with surestep stp-drv-4850 and stp-drv-80100 advanced microstepping drives. | 2211 | RFQ |
STP-CBL-CA10 | cables | surestep control cable, 11-pin connector to pigtail, 10ft cable length. for use with surestep stp-mtrd-17038 and stp-mtrd-17038e integrated stepper motor/drives. | 1024 | RFQ |
STP-CON-3 | motion control | surestep connector kit, replacement, includes (1) power connector, (1) rs-485 signal connector and (2) control signal connectors. for use with surestep stp-mtrd integrated stepper motor/drives except stp-mtrd-17038 and stp-mtrd-17038e. | 2224 | RFQ |
STP-MTRH-23079 | motion control | surestep stepper motor, nema 23 frame, ip40, single shaft, 5.6a, 286 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2991 | RFQ |
STP-CBL-EB3 | rotary encoders | surestep encoder cable, 17-pin connector to pigtail, 3ft cable length. for use with surestep stepper encoder with 17-pin male connectors. | 1785 | RFQ |
STP-USBENC-CBL-1 | cables | surestep programming cable, usb a connector to 17-pin connector, 3ft cable length. for use with surestep stepper encoder with 17-pin male connectors. | 2496 | RFQ |
STP-PWR-3204 | power products (electrical) | surestep linear power supply, 32 vdc at 4a unregulated, 5 vdc at 0.5a regulated output, 4a, 120w, 120/240 vac nominal input, switch selectable, 1-phase, anodized aluminum open frame, wall mount, screw terminals. | 2400 | RFQ |
STP-MTRL-14034E | motion control | surestep stepper motor, nema 14 frame, ip40, dual shaft, external (field-wireable) encoder, 0.8a, 20 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. requires stp-cbl-ebxx cable. | 2353 | RFQ |
STP-MTRA-ENC8 | rotary encoders | surestep incremental (quadrature) modular encoder, 5 vdc, radial, push-pull (totem) output, 400 ppr. for use with surestep stepper motors with 1/4in rear shaft. | 1925 | RFQ |
STP-EXT-006 | cables | surestep extension cable, 4-pin connector to pigtail, 6ft cable length. for use with surestep mtr series stepper motors. | 1661 | RFQ |
STP-MTRH-23079W | motion control | surestep stepper motor, nema 23 frame, ip65, single shaft, 5.6a, 286 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2320 | RFQ |
STP-MTR-17060 | motion control | surestep stepper motor, nema 17 frame, ip40, single shaft, 2a, 115 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2897 | RFQ |
STP-MTRAC-23044D | motion control | surestep stepper motor, nema 23 frame, ip40, dual shaft, encoder ready, 0.71a, 75 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. | 2486 | RFQ |
Industrial Parts Manufacturers |
Cronatron |
Rotanium |
Honeywell |
Prince Hydraulics |
Hub City Inc |
Boston Gear Altra |
browning |
Wago |
power team spx |
If you have more than one item,upload your spreadsheet here.
Guaranteed On - Time Delivery |
|
Customized & User-Friendly Database |
|
Over 5100 Manufacturers |
|
Competitive Prices |
|
Scheduling Flexibility |
|
Complete Purchasing Solutions |
We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
Request for Quote